Dynamova Engineering Solution

“Dynamova Engineering Solution” are a leading Manufacturer of a wide range of  Industrial shed, Warehouse shed,Car parking shed,Whether shed,FRP shed,Industrial Stair Case,Commercial Shed, MS Sliding Gate( Automatic and Manual), MS Door, MS Window, MS Window Grill . We are also provide Plant maintenace Fabrication Work.We procure these products from the most trusted and renowned vendors after stringent market analysis. Further, we offer these products at reasonable rates and deliver these within the promised time-frame. Under the headship of “Mr. Vikas Bhavsar” we have gained a huge clientele across the nation.

A warehouse fabrication shed is a type of industrial structure used for fabricating, assembling, or storing materials and goods. These sheds are designed to be functional, durable, and tailored to specific fabrication needs. Below are typical specifications for such a facility:

1. Dimensions

• Length: Varies based on specific requirements, typically from 50 meters to 200 meters or more.
• Width: Common widths range from 15 meters to 60 meters.
• Height: Clear height of 6 meters to 12 meters or more, depending on the equipment used inside.
• Span: Can be designed for single, double, or multi-span structures depending on load requirements

Parking shed for car and vahicals, indusrial, commercial, and residential for prevention of monsoon and heat

Car Parking Shed Fabrication – Description

The car parking shed shall be designed, fabricated, supplied, and installed as per approved drawings and specifications. The structure shall be suitable for long-term outdoor use and capable of withstanding wind loads, rain, and environmental conditions.

Structural Framework:

• The main framework shall be fabricated from mild steel (MS) sections such as hollow sections, pipes, angles, channels, or I-sections as specified.

• All steel members shall be cut, welded, drilled, and assembled in accordance with standard fabrication practices.

• Welding shall be done using approved electrodes, ensuring proper strength and finish.

• Base plates shall be provided and fixed to RCC foundations using anchor bolts.

Surface Treatment:

• All steel surfaces shall be cleaned of rust, oil, and scale.

• The structure shall be finished with one coat of red oxide/zinc-rich primer followed by two coats of synthetic enamel paint or as specified.
  (Alternatively, hot-dip galvanization may be provided if specified.)

Roofing System:

• Roofing shall be provided using color-coated GI sheets / polycarbonate sheets / tensile fabric as per design requirements.

• Sheets shall be fixed with self-drilling screws, washers, and necessary flashing to ensure watertightness.

• Proper slope shall be maintained for rainwater drainage.

Accessories & Finishing:

• Gutters and downpipes shall be provided where required.

• All sharp edges shall be ground smooth.

• The entire shed shall be aligned, leveled, and securely fixed.

Installation & Safety:

• Erection shall be carried out at site using proper lifting tools and safety measures.

• The completed parking shed shall be stable, durable, and aesthetically acceptable.

 

A polycarbonate sheet shed offers excellent durability, weather resistance, and light transmission, making it ideal for roofing and cladding applications. Here's a general specification for a polycarbonate sheet shed:

1. Material:

• Polycarbonate Sheet Type: Solid, twin-wall, or multi-wall polycarbonate sheets.
• Thickness: Typically ranges from 4mm to 20mm, depending on the application and structural requirements.
• Grade: UV-protected, impact-resistant polycarbonate.
• Color: Transparent, translucent (opal, bronze), or colored based on aesthetic or shading needs.
• Light Transmission: Up to 90% for clear sheets, and varies for tinted or opaque versions

A polycarbonate sheet shed offers excellent durability, weather resistance, and light transmission, making it ideal for roofing and cladding applications. Here's a general specification for a polycarbonate sheet shed:

1. Material:

• Polycarbonate Sheet Type: Solid, twin-wall, or multi-wall polycarbonate sheets.
• Thickness: Typically ranges from 4mm to 20mm, depending on the application and structural requirements.
• Grade: UV-protected, impact-resistant polycarbonate.
• Color: Transparent, translucent (opal, bronze), or colored based on aesthetic or shading needs.
• Light Transmission: Up to 90% for clear sheets, and varies for tinted or opaque versions